Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
IRON REMOVAL FROM RECYCLED Al-Si ALLOYS BY Cr, Sr, AND Mn ADDITIONS
Jönköping University, School of Engineering, JTH, Materials and Manufacturing.ORCID iD: 0009-0000-9374-6036
Jönköping University, School of Engineering, JTH, Materials and Manufacturing.ORCID iD: 0000-0002-2361-8810
Jönköping University, School of Engineering, JTH, Materials and Manufacturing.ORCID iD: 0000-0003-2929-7891
Jönköping University, School of Engineering, JTH, Materials and Manufacturing.ORCID iD: 0000-0002-0101-0062
2026 (English)In: International Journal of metalcasting, ISSN 1939-5981, E-ISSN 2163-3193Article in journal (Refereed) Epub ahead of print
Abstract [en]

Global aluminium production has been surging in recent years due to its favourable properties, which can be tailored through alloying. To cope with this increasing demand, aluminium production has shifted increasingly towards primary production, as secondary production is restricted by impurity accumulation, particularly iron (Fe). The addition of Fe-bearing intermetallic particle formers, such as manganese (Mn), chromium (Cr), and strontium (Sr), is a potential solution. In contrast to previous studies, which mainly focused on higher-Fe Al-Si alloys, the present work investigates the impact of varying Mn-Cr and Mn-Sr additions on the Fe removal efficiency, defined as the percentage of Fe content in the melt after sedimentation relative to the initial Fe content, the formation of Fe-bearing intermetallic particles and the yield of clean Al following particle sedimentation in low-Fe Al-Si alloys. The experimental work included small-scale melting with 8 kg of Al-11Si-0.5Fe alloys. The study concludes that using Fe-bearing intermetallic particle formers, such as Mn and Cr, is effective for low Fe concentrations in the melt. However, a higher quantity of Mn at constant Cr is necessary for a more efficient reduction of Fe. When comparing Mn-Cr with Mn-Sr additions, Mn-Cr additions improve Fe removal efficiency, whereas Mn-Sr significantly improves the clean aluminium output yield with lower Fe removal efficiency. Further increases in Sr adversely affect particle yield and packing density, with no impact on Fe removal efficiency.

Place, publisher, year, edition, pages
Springer, 2026.
Keywords [en]
Al-Si alloy, purification, sludge, Fe-bearing intermetallic particles, Fe removal and cleaning
National Category
Materials Engineering
Identifiers
URN: urn:nbn:se:hj:diva-71858DOI: 10.1007/s40962-026-01985-5ISI: 001773413600001Scopus ID: 2-s2.0-105039844818Local ID: HOA;;1086048OAI: oai:DiVA.org:hj-71858DiVA, id: diva2:2067611
Funder
Vinnova, 2022-00819Jönköping UniversityAvailable from: 2026-06-08 Created: 2026-06-08 Last updated: 2026-06-08

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records

Harazeen, AbdullahLattanzi, LuciaMatsushita, TaishiJarfors, Anders E.W.

Search in DiVA

By author/editor
Harazeen, AbdullahLattanzi, LuciaMatsushita, TaishiJarfors, Anders E.W.
By organisation
JTH, Materials and Manufacturing
In the same journal
International Journal of metalcasting
Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 89 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf