Öppna denna publikation i ny flik eller fönster >>Visa övriga...
2020 (Engelska)Ingår i: Transactions of Nonferrous Metals Society of China, ISSN 1003-6326, E-ISSN 2210-3384, Vol. 30, nr 11, s. 2861-2878Artikel i tidskrift (Refereegranskat) Published
Abstract [en]
The aims of the present work are to evaluate the overaging behaviour of the investigated Cu-enriched alloy and to assess its mechanical behaviour, in terms of the tensile and fatigue strength, at room temperature and at 200 °C, and to correlate the mechanical performance with its microstructure, in particular with the secondary dendrite arm spacing (SDAS). The mechanical tests carried out on the overaged alloy at 200 °C indicate that the addition of about 1.3 wt.% Cu to the A357 alloy enables to maintain ultimate tensile strength and yield strength values close to 210 and 200 MPa, respectively, and fatigue strength at about 100 MPa. Compared to the quaternary (Al−Si−Cu−Mg) alloy C355, the A357−Cu alloy has greater mechanical properties at room temperature and comparable mechanical behaviour in the overaged condition at 200 °C. The microstructural analyses highlight that SDAS affects the mechanical behaviour of the peak-aged A357−Cu alloy at room temperature, while its influence is negligible on the tensile and fatigue properties of the overaged alloy at 200 °C.
Ort, förlag, år, upplaga, sidor
Elsevier, 2020
Nyckelord
A357 alloy, Al−Si−Cu−Mg casting alloy, C355 alloy, fatigue behaviour, high temperature, overaging, tensile property, Fatigue testing, Magnesium alloys, Tensile strength, Thermal fatigue, Mechanical behaviour, Mechanical performance, Microstructural analysis, Overaged conditions, Room and high temperatures, Secondary dendrite arm spacing, Tensile and fatigue properties, Ultimate tensile strength, Copper alloys
Nationell ämneskategori
Metallurgi och metalliska material
Identifikatorer
urn:nbn:se:hj:diva-51482 (URN)10.1016/S1003-6326(20)65427-9 (DOI)000601054900001 ()2-s2.0-85098450980 (Scopus ID);JTHMaterialIS (Lokalt ID);JTHMaterialIS (Arkivnummer);JTHMaterialIS (OAI)
2021-01-142021-01-142025-10-13Bibliografiskt granskad