Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Influence of alumina on physical properties of an industrial zinc–copper smelting slag Part 2 – apparent density, surface tension and effective thermal diffusivity
Luleå University of Technology.
Jönköping University, School of Engineering, JTH. Research area Materials and manufacturing – Casting.
Luleå University of Technology.
Luleå University of Technology.
Show others and affiliations
2013 (English)In: Transactions of the Institution of Mining and Metallurgy Section C - Mineral Processing and Extractive Metallurgy, ISSN 0371-9553, Vol. 122, no 1, 49-55 p.Article in journal (Refereed) Published
Abstract [en]

Apparent density, surface tension and effective thermal diffusivity of an industrial iron‐silicate based slag and mixtures of this slag with 5, 10 and 15 wt-% alumina addition were measured using the sessile drop and the laser flash techniques respectively. A comparison is made between corresponding values obtained from the commonly applied models and the experimental measurements. Results show that increasing the alumina concentration in slag increases the degree of polymerisation of the melt and, consequently, its effective thermal diffusivity. By alumina addition to the system, the surface tension increases progressively from 338 mN m−1, in the reference slag sample, to 488 mN m−1 in the mixture of slag and 15 wt-% alumina addition. The apparent density of the liquid‐solid containing slag is continuously decreased due to the increased alumina concentration. However, the effect is more pronounced between 8 and 12 wt-% total alumina content in the slag.

Place, publisher, year, edition, pages
2013. Vol. 122, no 1, 49-55 p.
National Category
Engineering and Technology
Identifiers
URN: urn:nbn:se:hj:diva-20046DOI: 10.1179/1743285512Y.0000000015OAI: oai:DiVA.org:hj-20046DiVA: diva2:574235
Available from: 2012-12-05 Created: 2012-12-05 Last updated: 2013-09-06Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full text

Search in DiVA

By author/editor
Matsushita, Taishi
By organisation
JTH. Research area Materials and manufacturing – Casting
In the same journal
Transactions of the Institution of Mining and Metallurgy Section C - Mineral Processing and Extractive Metallurgy
Engineering and Technology

Search outside of DiVA

GoogleGoogle Scholar

Altmetric score

Total: 222 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf