Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
The effect of Fe-rich intermetallics on crack initiation in cast aluminium: an in-situ tensile study
Jönköping University, School of Engineering, JTH. Research area Materials and manufacturing – Casting. Jönköping University, School of Engineering, JTH, Materials and Manufacturing.ORCID iD: 0000-0003-4005-812X
Jönköping University, School of Engineering, JTH. Research area Materials and manufacturing – Casting. Jönköping University, School of Engineering, JTH, Materials and Manufacturing.ORCID iD: 0000-0002-7527-719X
Jönköping University, School of Engineering, JTH. Research area Materials and manufacturing – Casting. Jönköping University, School of Engineering, JTH, Materials and Manufacturing.ORCID iD: 0000-0001-6481-5530
Jönköping University, School of Engineering, JTH, Materials and Manufacturing. Jönköping University, School of Engineering, JTH. Research area Materials and manufacturing – Casting.
(English)Manuscript (preprint) (Other academic)
National Category
Metallurgy and Metallic Materials
Identifiers
URN: urn:nbn:se:hj:diva-36962OAI: oai:DiVA.org:hj-36962DiVA: diva2:1134877
Available from: 2017-08-21 Created: 2017-08-21 Last updated: 2017-08-21
In thesis
1. On the influence of imperfections on microstructure and properties of recycled Al-Si casting alloys
Open this publication in new window or tab >>On the influence of imperfections on microstructure and properties of recycled Al-Si casting alloys
2017 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

There are great energy savings to be made by recycling aluminium; as little as 5% of the energy needed for primary aluminium production may be required. Striving to produce high quality aluminium castings requires knowledge of microstructural imperfections, which is extra important when casting recycled aluminium that generally contains higher levels of imperfections compared to primary aluminium. Imperfections include amongst others Si, Fe, and Mn as well as oxides. Si is needed for castability, but it may also initiate fracture. There are different types of Fe-rich intermetallics influencing properties of castings, generally in a negative direction. Oxides constitute cracks and they are elusive because they are difficult to quantify.

This thesis aims to increase knowledge about imperfections in recycled aluminium castings originating from alloying elements and the melt. Experiments were performed in advanced laboratory equipment, including X-radiographic imaging during solidification and in-situ tensile testing in a scanning electron microscope. Experiments were also performed at industrial foundry facilities.

The experiments showed that the nucleation temperature of primary α-Fe intermetallics increased with higher Fe, Mn, and Cr contents. Primary α-Fe are strongly suggested to nucleate on oxides and to grow in four basic morphologies. Lower nucleation frequency of α-Fe promoted faster growth and hopper crystals while higher nucleation frequency promoted slower growth rates and massive crystals. Results also showed that a decrease in the size of the eutectic Si and plate-like β-Fe intermetallics improved tensile properties, foremost the elongation to fracture. In β-Fe containing alloys the transversely oriented intermetallics initiated macrocracks that are potential fracture initiation sites. In alloys with primary α-Fe foremost clusters of intermetallics promoted macrocracks. In fatigue testing, a transition from β-Fe to α-Fe shifted the initiation sites from oxides and pores to the α-Fe, resulting in a decrease of fatigue strength. Oxides in Al-Si alloys continue to be elusive; no correlations between efforts to quantify the oxides and tensile properties could be observed.

Abstract [sv]

Genom att återvinna aluminium kan stora energibesparingar göras eftersom återvinning kan förbruka så lite som 5% av den energi som behövs för produktion av primär aluminium. Vid gjutning av högkvalitativa aluminiumprodukter krävs förståelse för defekter i mikrostrukturen och denna kunskap är extra viktig vid användning av återvunnen aluminium, som i regel innehåller mer defekter än primär aluminium. Defekterna består bland annat av Si, Fe och Mn samt oxider. Si behövs för gjutbarhet men kan också initiera brott. Järnrika intermetaller kan ha olika morfologier som generellt påverkar gjutna komponenter negativt. Oxider, som kan utgöra sprickor, är gäckande då de är svåra att kvantifiera.

Denna avhandlings syfte är att öka kunskapen om defekter i gjutna komponenter av återvunnen aluminium. Experiment utfördes med avancerad laborationsutrustning så som röntgenfotografering av prover under stelning och dragprovning i svepelektronmikroskop. Experiment utfördes också i industrimiljö.

Experimenten visade att kärnbildningstemperaturen steg för primära α-Fe intermetaller med ökade andelar av Fe, Mn och Cr. Resultaten tyder starkt på att primär α-Fe kärnbildas på oxider och att de växer i fyra olika morfologier. Lägre kärnbildningstäthet av α-Fe främjade snabbare tillväxt av kristaller med håligheter men högre kärnbildningstäthet främjade långsammare tillväxt av massiva kristaller. Resultaten visade också att minskad storlek av eutektiskt Si och β-Fe intermetaller ledde till förbättring av dragprovsresultaten, främst brottförlängningen. I legeringar med β-Fe ledde transversellt orienterade intermetaller till makrosprickor vilka kan initiera brott. I legeringar med primär α-Fe var det främst kluster av intermetaller som orsakade makrosprickor. I utmattningsprovning orsakade modifiering av β-Fe till α-Fe förflyttning av sprickinitieringen från oxider och porer till α-Fe, vilket resulterade i en reducerad utmattningshållfasthet. Oxiderna i Al-Si-legeringar fortsätter att gäcka; ingen korrelation mellan försök att kvantifiera oxiderna och draghållfasthet kunde påvisas.

Place, publisher, year, edition, pages
Jönköping: Jönköping University, School of Engineering, 2017. 67 p.
Series
JTH Dissertation Series, 28
Keyword
Imperfections, Recycled Al-Si alloys, Fe-rich intermetallics, Melt quality, Fractography, Defekter, Återvunna Al-Si legeringar, Fe-rika intermetaller, Smältakvalité, Fraktografi
National Category
Metallurgy and Metallic Materials
Identifiers
urn:nbn:se:hj:diva-36963 (URN)978-91-87289-29-3 (ISBN)
Public defence
2017-09-15, E1405 (Gjuterisalen), Tekniska Högskolan, Jönköping, 10:00
Opponent
Supervisors
Available from: 2017-08-21 Created: 2017-08-21 Last updated: 2017-08-21Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Bjurenstedt, AntonGhassemali, EhsanSeifeddine, SalemDahle, Arne
By organisation
JTH. Research area Materials and manufacturing – CastingJTH, Materials and Manufacturing
Metallurgy and Metallic Materials

Search outside of DiVA

GoogleGoogle Scholar

Total: 56 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf