Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Microstructural and mechanical properties characterization of heat treated and overaged cast A354 alloy with various SDAS at room and elevated temperature
University of Bologna, Italy.
University of Bologna, Italy.
University of Bologna, Italy.
Linköping University.
Visa övriga samt affilieringar
2015 (Engelska)Ingår i: Materials Science & Engineering: A, ISSN 0921-5093, E-ISSN 1873-4936, Vol. 648, s. 340-349Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The aim of the present study was to carry out a microstructural and mechanical characterization of the A354 (Al-Si-Cu-Mg) cast aluminum alloy. The effect of microstructure on the tensile behavior was evaluated by testing samples with different Secondary Dendrite Arm Spacing, (SDAS) values (20-25 mu m and 50-70 mu m for fine and coarse microstructure, respectively), which were produced through controlled casting conditions. The tensile behavior of the alloy was evaluated both at room and elevated temperature (200 degrees C), in the heat treated and averaged (exposure at 210 degrees C for 41 h, after heat treatment) conditions. Optical, scanning electron microscopy (SEM) and scanning transmission electron microscopy (STEM) were used for microstructural investigations. Experimental data confirmed the significant role of microstructural coarseness on the tensile behavior of A354 alloy. Ultimate tensile strength and elongation to failure strongly increased with the decrease of SDAS. Moreover, solidification rate influenced other microstructural features, such as the eutectic silicon morphology as well as the size of the intermetallic phases, which in turn also influenced elongation to failure. Coarsening of the strengthening precipitates was induced by overaging, as observed by STEM analyses, thus leading to a strong reduction of the tensile strength of the alloy, regardless of SDAS. Tensile properties of the alloy sensibly decrease at elevated temperature (200 degrees C) in all the investigated heat treatment conditions. (C) 2015 Elsevier B.V. All rights reserved.

Ort, förlag, år, upplaga, sidor
2015. Vol. 648, s. 340-349
Nyckelord [en]
A354, Al-Si-Cu-Mg alloys, Tensile properties, SDAS, Elevated temperature, Overaging
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:hj:diva-28450DOI: 10.1016/j.msea.2015.09.072ISI: 000363820700043Scopus ID: 2-s2.0-84942603319Lokalt ID: JTHMaterialISOAI: oai:DiVA.org:hj-28450DiVA, id: diva2:876625
Tillgänglig från: 2015-12-04 Skapad: 2015-12-02 Senast uppdaterad: 2017-12-01Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Seifeddine, Salem

Sök vidare i DiVA

Av författaren/redaktören
Seifeddine, Salem
Av organisationen
JTH. Forskningsmiljö Material och tillverkning – Gjutning
I samma tidskrift
Materials Science & Engineering: A
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 210 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf