Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Microstructural Evolution in a Low Carbon Steel During Cold Rolling and Subsequent Annealing
Department of Materials Engineering, Isfahan University of Technology.ORCID-id: 0000-0002-7527-719X
Department of Materials Engineering, Isfahan University of Technology.
Department of Materials Engineering, Isfahan University of Technology.
2010 (Engelska)Ingår i: Journal of Nanoscience and Nanotechnology, ISSN 1533-4880, E-ISSN 1533-4899, Vol. 10, nr 9, s. 6177-6181Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Cold rolling with subsequent annealing of lath martensite structure could lead to the formation of nanostructures in low carbon steels. In the present work, the microstructural evolution of a 0.13% C steel during this process was studied. The specimens were austenitized at 950 °C followed by quenching in ice-brine to get martensitic structure. The quenched samples were aged at 200 °C for 30 min. These specimens were cold rolled up to 90% reduction in thickness without any intermediate annealing and then annealed at the temperatures from 400 to 600 °C. Scanning and transmission electron microscopy and color metallography was used to investigate the microstructure. Microscopic investigations showed that a multiphase nanostructure composed of equiaxed ferrite grains with the mean grain size of about 188 nm and small blocks of tempered martensite can be achieved under annealing at 400 °C for 90 min. Formation of the nanostructure was discussed from the viewpoint of characteristics of the martensite starting structure. Fragmentation of martensite lathes in cold rolling stage play an important role on recrystallization at annealing stage to get the ultrafine structure.

Ort, förlag, år, upplaga, sidor
American Scientific Publishers, 2010. Vol. 10, nr 9, s. 6177-6181
Nyckelord [en]
Nano/Ultrafine Grained Steel, Recrystallization, Color Metallography, Annealing
Nationell ämneskategori
Materialteknik
Identifikatorer
URN: urn:nbn:se:hj:diva-24222DOI: 10.1166/jnn.2010.2578ISI: 000279836400101Scopus ID: 2-s2.0-78449232155OAI: oai:DiVA.org:hj-24222DiVA, id: diva2:732535
Tillgänglig från: 2014-07-04 Skapad: 2014-07-04 Senast uppdaterad: 2017-12-05Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Ghassemali, Ehsan

Sök vidare i DiVA

Av författaren/redaktören
Ghassemali, Ehsan
I samma tidskrift
Journal of Nanoscience and Nanotechnology
Materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 111 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf