Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
CAD-Model Parsing for Automated Design and Design Evaluation
Högskolan i Jönköping, Tekniska Högskolan, JTH. Forskningsområde Datorstödd konstruktion.
2008 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Product development has both innovative and analytic sides. Starting from the requirements, a design suggestion is generated. In order to assess how well the envisioned design fulfils the requirements, it is sometimes necessary to build a computer model of it for the analysis. The overall motivation of the work presented is to reduce the time spent on creating the model by reusing knowledge gained from developing similar products by suggesting, building and evaluating IT-systems. To verify the systems real design examples, obtained from companies that have participated in the research projects have been used.

The work is based on two major application examples. The first, involving the automated geometrical idealisation of die-cast parts (Paper I-III), and the second involving manufacturability of powder metallurgy pressed and sintered parts (Paper IV-VI). The work starts from the point in the product development process where it exists a design suggestion represented as an arbitrary format CAD-model. In the powder metallurgy case the object is to secure that the geometry is suitable for the production process. In the die-casting case the object is to automatically create an idealised version of the model for shell elements meshing. These two tasks have previously been treated as two separate cases, addressed by completely different software. This thesis suggests a common method for addressing the two cases. The method is based on converting the CAD-models, using the geometrical restrictions of the production processes, into a format with a specialised feature structure, parameterisation and construction history using a feature recognition approach. The features are then automatically reconstructed in a target CAD-system. The resulting, specialised CAD-model can be used for automated design and design evaluation purposes, demonstrated in the thesis. The models are therefore called DAR (Design Automation Ready)-models. The DAR-models are useful in that they separate the conversion from the subsequent treatment of the models providing modularisation, flexibility and user insight in the model structure. In that a construction history and parameterisation have be constructed in the target CAD-system, the advanced geometry manipulation and means for knowledge management often provided in modern CAD-systems can be accessed in a transparent and user manageable way. This extends the usefulness of the CAD-systems from involving only interactive work to managing all components sharing the same production process.

Ort, förlag, år, upplaga, sidor
Göteborg: Chalmers Reproservice , 2008. , s. 162
Serie
Doktorsavhandlingar vid Chalmers Tekniska Högskola, ISSN 0346-718X ; 2856
Nyckelord [en]
Design automation, CAD, KBE, Feature based modelling, Feature recognition, Product development.
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Identifikatorer
URN: urn:nbn:se:hj:diva-10700ISBN: 978-91-7385-175-6 (tryckt)OAI: oai:DiVA.org:hj-10700DiVA, id: diva2:273437
Disputation
2008-12-11, E1405, Tekniska Högskolan i Jönköping, Gjuterigatan 6, 551 11 Jönköping, Jönköping, 10:00 (Engelska)
Opponent
Handledare
Anmärkning
Teknologie DoktorsexamenTillgänglig från: 2009-11-03 Skapad: 2009-10-21 Senast uppdaterad: 2009-11-03Bibliografiskt granskad
Delarbeten
1. Identifying Features in Cad-Models for Powder Metallurgy Component Evaluation
Öppna denna publikation i ny flik eller fönster >>Identifying Features in Cad-Models for Powder Metallurgy Component Evaluation
2008 (Engelska)Ingår i: Proceedings of the Design 2008, 10th International Design Conference, 2008, s. 689-696Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

This paper presents a newly developed CAD-integrated system for the manufacturability evaluation of designs of powder metallurgy (PM) pressed and sintered parts. The contribution of the paper is the automated reconstruction of a specialized construction history tree from any CAD-model directly in the receiving CAD-system. The reconstruction is based on the geometrical restrictions of the shapes that can be manufactured by the PM process. This facilitates the creation of a transparent and user-revisable rule-base to evaluate the parts manufacturability, which is shown. It will enable designers to get feedback on their designs, reducing the number of design loops with the PM-parts supplier needed before the parts geometry can be established.

Nyckelord
Feature, CAD, Rule, Powder Metallurgy
Nationell ämneskategori
Materialteknik
Identifikatorer
urn:nbn:se:hj:diva-1641 (URN)978-953-6313-89-1 (ISBN)
Tillgänglig från: 2008-09-29 Skapad: 2008-09-29 Senast uppdaterad: 2010-01-08Bibliografiskt granskad
2. An Automated Design and Advisory System for Pressed-and-Sintered Powder Metallurgy Parts
Öppna denna publikation i ny flik eller fönster >>An Automated Design and Advisory System for Pressed-and-Sintered Powder Metallurgy Parts
2008 (Engelska)Ingår i: Proceedings of the 2008 World Congress on Powder Metallurgy & Particulate Materials, June 8–12, Washington, D.C. United States, Princeton, NJ, United States: MPIF , 2008Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

The aim of the present paper is to dissolve the bottleneck for PM market expansion caused by lack of knowledge among designers about PM-specific design principles by proposing an automated PM-part advisory system. The system, called PM-Wizard, checks that a PM-part design suggestion represented as any 3D solid CAD-model complies with the geometrical design rules and recommendations for PM-parts. The system consists of a rule-base hosted by a modern commercial CAD/CAE-system and a programmed algorithmic procedure that converts the design suggestion into a specially developed format. The format enables the automated evaluation of the PM-part in the receiving CAD/CAE-system informing the designer on how the geometry should be revised to facilitate the pressing. The conversion algorithm has been tested on a large number of PM-parts, and the result is that all the tested parts can be converted into the proposed format and successfully evaluated.

Ort, förlag, år, upplaga, sidor
Princeton, NJ, United States: MPIF, 2008
Nyckelord
Powder Metallurgy, Advisory system, Knowledge-based Engineering
Nationell ämneskategori
Materialteknik
Identifikatorer
urn:nbn:se:hj:diva-6558 (URN)0-9793488-9-7 (ISBN)
Tillgänglig från: 2008-10-16 Skapad: 2008-10-16 Senast uppdaterad: 2009-02-16Bibliografiskt granskad
3. Reusing CAD-models of Die-cast products for FEA
Öppna denna publikation i ny flik eller fönster >>Reusing CAD-models of Die-cast products for FEA
2006 (Engelska)Ingår i: NAFEMS Seminar: Prediction and Modelling of Failure Using FEA, 2006Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Parts for trimmers, lawnmowers and chainsaws are often manufactured by die-casting in light alloys. These parts often have a complex geometry with thin-walled regions mixed with regions of non thin-walled geometry. This paper discusses the process of creating FEA-models from CAD-models of such parts. The objective of the FEA, in the particular case described in this paper, is to predict the performance of the complete products. Since a FEA-model of the complete product require extensive computational power to solve, it is necessary to keep the computational cost down by f. ex using shell-elements instead of solid-elements where applicable.

The creation of the shell-element mesh based on the solid CAD-model can be time consuming, especially if the CAD-model is complicated as often the case in real products. To aid in the creation of the shell-element mesh there is commercial software available for the extraction of the mid-surfaces in the CAD-model. In this paper two different software for mid-surface extraction are tested, both included in pre-processors for high-end FEA solvers. The software was tested on six different die-cast or injection moulded parts, all components in consumer products available on the market.

The result is that the software can extract the individual mid-surfaces well but the connections between them are often not created properly.

Furthermore the software cannot, as expected, deal with the regions that divert too much from being thin-walled. This paper present an idea on how treat these regions by retrieving suitable representations from a depository of representations known from experience to represent the geometry well and insert them in the appropriate position in the FEA-model automatically.

To show the feasibility of the idea a demonstrator program created in CATIA V5 using VBA is also presented in this paper.

Identifikatorer
urn:nbn:se:hj:diva-1726 (URN)
Tillgänglig från: 2007-08-03 Skapad: 2007-08-03 Senast uppdaterad: 2010-01-12Bibliografiskt granskad
4. A CAD-integrated system for automated idealization of CAD-models for finite element analysis
Öppna denna publikation i ny flik eller fönster >>A CAD-integrated system for automated idealization of CAD-models for finite element analysis
2005 (Engelska)Ingår i: Proceedings of IDETC/CIE 2005: ASME 2005, 2005Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

The work described in this paper seeks to minimize the time spent on manually reducing thin-walled CAD-geometry into surface idealizations. The purpose of the geometrical idealizations is the creation of shell element meshes for FE-calculations. This is motivated by time and thereby cost savings and also to make the results of the calculations available earlier in the product development process allowing the results to guide the designs to a larger extent.

Systems for automated geometry idealization and creation of FE-models already exist, but this paper describes a novel approach with the working principle of analyzing how the CAD-specific features of the CAD-file history tree are constituted. This information is used to automatically create the best practice geometrical idealization in the same CAD-model.

Evaluation of the performance of the system in an industrial example is also presented.

Nyckelord
KBE, CAD, Finite element analysis, Simulation-Driven design, CATIA V5
Identifikatorer
urn:nbn:se:hj:diva-1725 (URN)
Tillgänglig från: 2007-08-03 Skapad: 2007-08-03 Senast uppdaterad: 2010-01-12Bibliografiskt granskad
5. Managing Product and Process Knowledge in CAD-Systems
Öppna denna publikation i ny flik eller fönster >>Managing Product and Process Knowledge in CAD-Systems
2009 (Engelska)Ingår i: NordPLM'09: Proceedings of the 2nd Nordic Conference on Product Lifecycle Management / [ed] Johan Malmqvist and Göran Gustafsson, Göteborg: Chalmers University of Technology , 2009, s. 51-61Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

In order to codify, manage, and reuse the knowledge gained from pursing product development projects, CAD-programs have started to provide functionality for supporting this activity. Since the primary purpose of the CAD program is to interactively define geometry, the functionality has been integrated primarily to be used on the parameters of the CAD-model of the design instance. This paper explores how the functionality can be used in a broader scope, managing and automatically reusing knowledge for all designs intended for a certain production process. This is facilitated by automatically converting an arbitrary CAD-model of a design to a format that is accessible for knowledge handling and reuse functionality in the CAD-system. A conversion algorithm for the processes die-casting and powder metallurgy pressing sintering is presented, as well as showing how the knowledge can be represented in the CAD-system. This will allow engineers to actively participate in the knowledge build-up and insure that the general knowledge can be handled in the companies’ IT-infrastructure.

Ort, förlag, år, upplaga, sidor
Göteborg: Chalmers University of Technology, 2009
Nyckelord
Production process, Knowledge-based engineering, CAD, Application programming, Knowledge management
Identifikatorer
urn:nbn:se:hj:diva-10698 (URN)978-91-975079-7-4 (ISBN)
Tillgänglig från: 2009-10-21 Skapad: 2009-10-21 Senast uppdaterad: 2010-04-12Bibliografiskt granskad
6. Automatic preparation of CAD-generated solid geometry for FE-meshing
Öppna denna publikation i ny flik eller fönster >>Automatic preparation of CAD-generated solid geometry for FE-meshing
2005 (Engelska)Ingår i: NAFEMS World Congress 2005, 2005, s. 101-Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

In recent years the computing power and meshing algorithms have developed to a state where FEA problems can often be solved directly using the solid geometry. However for complex geometry and complicated calculations there will for the foreseeable future be a need for geometrical idealizations.

To reduce the time spent on making geometrical idealizations in repetitive FEA, a CAD-integrated KBES (Knowledge Based Engineering System) has been developed. The KBES creates a surface idealization from a thin-walled solid by utilizing generic modelling knowledge and by registering information about the CAD-specific features which the designer uses to define the solid geometry. From this information a corresponding surface idealization is created in the same CAD-system. This allows an updated and parametric geometry idealization of the complete CAD-geometry to be created with a degree of automation directly in the CAD-system.

Primarily the mid-surfaces oriented in the tooling draft direction are created by evaluating the sketches which the features of the CAD-model are based on. The KBES also trims the created surfaces, thus facilitating the subsequent meshing.

The KBES has been developed in CATIA V5 (Dassault systemes). It contains rules defined in CATIA knowledgeware which trigger sequential routines written in VBA (Visual Basic for Applications). An industrial application example where the system is used to automatically create a surface idealization for a die-cast part is also presented.

Nationell ämneskategori
Teknik och teknologier Tillförlitlighets- och kvalitetsteknik
Identifikatorer
urn:nbn:se:hj:diva-1724 (URN)1-874 376 034 (ISBN)
Tillgänglig från: 2007-08-03 Skapad: 2007-08-03

Open Access i DiVA

fulltext(35141 kB)2313 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 35141 kBChecksumma SHA-512
a0934ec99c51d2e7053a18d213f429df28026880c52f4b1ea6c0608201abf6176c1c52ddee344a1770b6813a92b4ab437597e5db608c434331e326569aa556e3
Typ fulltextMimetyp application/pdf

Personposter BETA

Stolt, Roland

Sök vidare i DiVA

Av författaren/redaktören
Stolt, Roland
Av organisationen
JTH. Forskningsområde Datorstödd konstruktion
Produktionsteknik, arbetsvetenskap och ergonomi

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 2313 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 978 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf