This study investigates the scratch load effect, from 100 to 2000 mN, on micro-mechanisms involved during scratching. A pearlitic and three ferritic Compacted Graphite Irons (CGI) solution strengthened through addition of 3.66, 4.09, and 4.59 Si wt% were investigated. Good correlation was observed between hardness measurements, tensile testing, and scratch results explaining the influence of matrix characteristics on scratch behaviour for investigated alloys. A significant matrix deformation, change in frictional force and scratch coefficient of friction was observed by increase in scratch load. In all cases, microscratch depth and width increased significantly with load increasing, however pearlitic CGI showed most profound deformation, while the maximum and minimum scratch resistances were observed for high-Si ferritic and pearlitic CGI alloys, respectively.