Change search
Link to record
Permanent link

Direct link
BETA
Alternative names
Publications (8 of 8) Show all publications
Bruch, J., Rösiö, C., Bellgran, M. & Granlund, A. (2014). User-supplier integration throughout the different lifecycle stages of the production equipment. In: 6th Swedish Production Symposium SPS'14: . Paper presented at 6th Swedish Production Symposium SPS'14, Göteborg, 16-18 September, 2014..
Open this publication in new window or tab >>User-supplier integration throughout the different lifecycle stages of the production equipment
2014 (English)In: 6th Swedish Production Symposium SPS'14, 2014Conference paper, Published paper (Refereed)
Abstract [en]

As production equipment is often designed and built by equipment suppliers rather than made in-house, a collaborative buyer-supplier-relationship could be utilized in order to create robust solutions and enhance innovative ideas. The purpose with this paper is to explore critical user-supplier collaboration activities throughout the different lifecycle stages of the production equipment development. The purpose is accomplished by a literature review and a case study including more than 30 semi-structured interviews at four companies. The challenges vary depending on equipment life cycle phase and user/supplier perspective. A life cycle model with eight stages is proposed including critical interconnected activities for each stage.

Keywords
Production equipment development, User-Equipment supplier integration, Life cycle, Manufacturing industry.
National Category
Other Engineering and Technologies Production Engineering, Human Work Science and Ergonomics
Identifiers
urn:nbn:se:hj:diva-29734 (URN)
Conference
6th Swedish Production Symposium SPS'14, Göteborg, 16-18 September, 2014.
Projects
XPRESEQUIP: User-Supplier integration in production equipment design
Available from: 2014-12-03 Created: 2016-04-08 Last updated: 2016-04-08Bibliographically approved
Bellgran, M., Bruch, J., Rösiö, C. & Wiktorsson, M. (2013). Decision support for production localization: Process, activities and localization factors. In: : . Paper presented at 20th EurOMA International Annual Conference, Operations Management at the Heart of Recovery, Dublin, 7th-12th June, 2013.. International Annual EurOMA Conference
Open this publication in new window or tab >>Decision support for production localization: Process, activities and localization factors
2013 (English)Conference paper, Published paper (Refereed)
Abstract [en]

Traditional production location decisions are mainly based upon economic factors while factors that facilitate decision makers in selecting the most suitable production location in terms of operations performance are rarely considered. Therefore, this paper presents a developed decision support for production localization that emphasises operational factors to be considered in the decision making. The research methodology combines a literature study with a multiple case study method. The findings are synthesised into a five phase decision process for making production localization decisions in practice. For each of these phases, key activities with related tools and expected output are developed.

Place, publisher, year, edition, pages
International Annual EurOMA Conference, 2013
Keywords
Production location decision, Decision process, Localization factors
National Category
Production Engineering, Human Work Science and Ergonomics
Identifiers
urn:nbn:se:hj:diva-29732 (URN)
Conference
20th EurOMA International Annual Conference, Operations Management at the Heart of Recovery, Dublin, 7th-12th June, 2013.
Projects
PROLOCXPRES
Funder
XPRES - Initiative for excellence in production research
Available from: 2016-04-08 Created: 2016-04-08 Last updated: 2018-09-12Bibliographically approved
Bjelkemyr, M., Wiktorsson, M., Rösiö, C., Bruch, J. & Bellgran, M. (2013). Production Localization Factors: An Industrial and Literature Based Review. In: E. Shehab, P. Ball & B. Tjahjono (Ed.), Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013): . Paper presented at 11th International Conference on Manufacturing Research, Cranfield, 19-20 September, 2013. (pp. 489-494). International Conference on Manufacturing Research (ICMR)
Open this publication in new window or tab >>Production Localization Factors: An Industrial and Literature Based Review
Show others...
2013 (English)In: Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013) / [ed] E. Shehab, P. Ball & B. Tjahjono, International Conference on Manufacturing Research (ICMR) , 2013, p. 489-494Conference paper, Published paper (Refereed)
Abstract [en]

Decision are commonly based on the available or easily accessible information; this is also true for more complex assessments like production localization. Where to locate production is often a key strategic decisions that has great impact on a company’s profitability for a long time; insufficient business intelligence may therefore have grave consequences. Six production localization factor studies have been assessed to see if they are focusing on the same issues and if there are any gaps. A new approach for structuring localization factors and the localization process is then presented and assessed with regards to some previously identified critical issues.

Place, publisher, year, edition, pages
International Conference on Manufacturing Research (ICMR), 2013
Keywords
production system, production localization, industrial study, localization factors.
National Category
Engineering and Technology Production Engineering, Human Work Science and Ergonomics
Identifiers
urn:nbn:se:hj:diva-29733 (URN)978-1-907413-23-0 (ISBN)
Conference
11th International Conference on Manufacturing Research, Cranfield, 19-20 September, 2013.
Projects
PROLOC - Manufacturing Footprint during the Product´s Life CycleXPRES
Available from: 2013-12-16 Created: 2016-04-08 Last updated: 2018-09-12Bibliographically approved
Rösiö, C., Wiktorsson, M., Bruch, J. & Bellgran, M. (2013). Risk Analysis in Manufacturing Footprint Decisions. In: E. Shehab, P. Ball, & B. Tjahjono (Ed.), Advances in manufacturing technology XXVII : proceedings of the 11th International Conference on Manufacturing Research : incorporating the 28th National Conference on Manufacturing Research: . Paper presented at International Conference on Manufacturing Research 2013, Cranfield UK, 19-20 September, 2013 (pp. 495-500). Cranfield University Press
Open this publication in new window or tab >>Risk Analysis in Manufacturing Footprint Decisions
2013 (English)In: Advances in manufacturing technology XXVII : proceedings of the 11th International Conference on Manufacturing Research : incorporating the 28th National Conference on Manufacturing Research / [ed] E. Shehab, P. Ball, & B. Tjahjono, Cranfield University Press , 2013, p. 495-500Conference paper, Published paper (Refereed)
Abstract [en]

A key aspect in the manufacturing footprint analysis is the risk and sensitivity analysis of critical parameters. In order to contribute to efficient industrial methods and tools for making well-founded strategic decisions regarding manufacturing footprint this paper aims to describe the main risks that need to be considered while locating manufacturing activities, and what risk mitigation techniques and strategies that are proper in order to deal with these risks. It is also proposed how the risk analysis should be included in the manufacturing location decision process.

Place, publisher, year, edition, pages
Cranfield University Press, 2013
Keywords
risk analysis, manufacturing location decision process, manufacturing footprint
National Category
Engineering and Technology
Identifiers
urn:nbn:se:hj:diva-29745 (URN)978-1-907413-23-0 (ISBN)
Conference
International Conference on Manufacturing Research 2013, Cranfield UK, 19-20 September, 2013
Projects
PROLOC - Manufacturing Footprint during the Product´s Life Cyclexpres
Funder
XPRES - Initiative for excellence in production research
Available from: 2013-11-01 Created: 2016-04-08 Last updated: 2018-09-12Bibliographically approved
Schedin, J., Rösiö, C. & Bellgran, M. (2012). Considering Production Localisation in the Production System Design process. In: : . Paper presented at The Fifth International Production Symposium,(SPS12), Linköping, 6-8 November, 2012..
Open this publication in new window or tab >>Considering Production Localisation in the Production System Design process
2012 (English)Conference paper, Published paper (Refereed)
National Category
Engineering and Technology Production Engineering, Human Work Science and Ergonomics
Research subject
Innovation and Design
Identifiers
urn:nbn:se:hj:diva-29746 (URN)
Conference
The Fifth International Production Symposium,(SPS12), Linköping, 6-8 November, 2012.
Funder
XPRES - Initiative for excellence in production research
Available from: 2012-12-20 Created: 2016-04-08 Last updated: 2018-09-12Bibliographically approved
Jackson, M., Bellgran, M. & Wiktorsson, M. (2008). Factory-in-a-box - Demonstrating the next generation manufacturing provider. In: Mamoru Mitsuishi, Kanji Ueda and Fumihiko Kimura (Ed.), Manufacturing systems and technologies for the new frontier: . Paper presented at The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan (pp. 341-346). Springer London
Open this publication in new window or tab >>Factory-in-a-box - Demonstrating the next generation manufacturing provider
2008 (English)In: Manufacturing systems and technologies for the new frontier / [ed] Mamoru Mitsuishi, Kanji Ueda and Fumihiko Kimura, Springer London , 2008, p. 341-346Conference paper, Published paper (Refereed)
Abstract [en]

Meeting customer demands require manufacturing systems with a high degree of flexibility, low-cost/low-volume manufacturing skills, as well as short delivery times. On top of these challenges, there is a gigantic need within industry for technologies and strategies that will reduce CO(2) emissions globally. In this challenging environment there is a need to identify and develop new and improved manufacturing capabilities within the manufacturing industry. The Factory-in-a-Box concept consists of standardized production modules that are e.g. installed in a container and transported by truck or by train. The concept has been developed, exemplified and realized in five industrial demonstrators developed by researchers together with competitive manufacturing companies in Sweden such as ABB Robotics, Bombardier and Pharmadule. The objective of this paper is to discuss the possibility of realizing a Product Service System (PSS) using the results from the Factory-in-a-Box project.

Place, publisher, year, edition, pages
Springer London, 2008
National Category
Engineering and Technology
Research subject
Innovation and Design
Identifiers
urn:nbn:se:hj:diva-34516 (URN)10.1007/978-1-84800-267-8_70 (DOI)000256581900070 ()978-1-84800-267-8 (ISBN)
Conference
The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan
Available from: 2010-03-03 Created: 2016-12-22 Last updated: 2016-12-28Bibliographically approved
Bellgran, M., Yamamoto, Y. & Jackson, M. (2008). Kaizen and Kaikaku–: Recent challenges and support models. In: : . Paper presented at Swedish Production Symposium SPS, Stockholm, 2008. Stockholm
Open this publication in new window or tab >>Kaizen and Kaikaku–: Recent challenges and support models
2008 (English)Conference paper, Published paper (Refereed)
Place, publisher, year, edition, pages
Stockholm: , 2008
National Category
Engineering and Technology Production Engineering, Human Work Science and Ergonomics
Identifiers
urn:nbn:se:hj:diva-34473 (URN)
Conference
Swedish Production Symposium SPS, Stockholm, 2008
Projects
XPRES
Available from: 2013-12-10 Created: 2016-12-22 Last updated: 2016-12-28Bibliographically approved
Wiktorsson, M., Bellgran, M. & Jackson, M. (2008). Sustainable Manufacturing - Challenges and Possibilities for Research and Industry from a Swedish perspective. In: : . Paper presented at The 41st CIRP Conference on Manufacturing Systems.
Open this publication in new window or tab >>Sustainable Manufacturing - Challenges and Possibilities for Research and Industry from a Swedish perspective
2008 (English)Conference paper, Published paper (Refereed)
National Category
Production Engineering, Human Work Science and Ergonomics
Research subject
Innovation and Design
Identifiers
urn:nbn:se:hj:diva-34555 (URN)
Conference
The 41st CIRP Conference on Manufacturing Systems
Available from: 2010-03-03 Created: 2016-12-22 Last updated: 2016-12-22Bibliographically approved
Organisations
Identifiers
ORCID iD: ORCID iD iconorcid.org/0000-0002-0662-539X

Search in DiVA

Show all publications