Ändra sökning
Länk till posten
Permanent länk

Direktlänk
BETA
Cenanovic, Mirza
Publikationer (7 of 7) Visa alla publikationer
Cenanovic, M. (2017). Finite element methods for surface problems. (Doctoral dissertation). Jönköping: Jönköping University, School of Engineering
Öppna denna publikation i ny flik eller fönster >>Finite element methods for surface problems
2017 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

The purpose of this thesis is to further develop numerical methods for solving surface problems by utilizing tangential calculus and the trace finite element method. Direct computation on the surface is possible by the use of tangential calculus, in contrast to the classical approach of mapping 2D parametric surfaces to 3D surfaces by means of differential geometry operators. Using tangential calculus, the problem formulation is only dependent on the position and normal vectors of the 3D surface. Tangential calculus thus enables a clean, simple and inexpensive formulation and implementation of finite element methods for surface problems. Meshing techniques are greatly simplified from the end-user perspective by utilizing an unfitted finite element method called the Trace Finite Element Method, in which the basic idea is to embed the surface in a higher dimensional mesh and use the shape functions of this background mesh for the discretization of the partial differential equation. This method makes it possible to model surfaces implicitly and solve surface problems without the need for expensive meshing/re-meshing techniques especially for moving surfaces or surfaces embedded in 3D solids, so called embedded interface problems. Using these two approaches, numerical methods for solving three surface problems are proposed: 1) minimal surface problems, in which the form that minimizes the mean curvature was computed by iterative update of a level-set function discretized using TraceFEM and driven by advection, for which the velocity field was given by the mean curvature flow, 2) elastic membrane problems discretized using linear and higher order TraceFEM, which makes it straightforward to embed complex geometries of membrane models into an elastic bulk for reinforcement and 3) stabilized, accurate vertex normal and mean curvature estimation with local refinement on triangulated surfaces. In this thesis the basics of the two main approaches are presented, some aspects such as stabilization and surface reconstruction are further developed, evaluated and numerically analyzed, details on implementations are provided and the current state of work is presented.

Ort, förlag, år, upplaga, sidor
Jönköping: Jönköping University, School of Engineering, 2017. s. 144
Serie
JTH Dissertation Series ; 022
Nyckelord
trace finite element method, membrane, mean curvature, level-set method
Nationell ämneskategori
Maskinteknik Datorteknik
Identifikatorer
urn:nbn:se:hj:diva-35369 (URN)978-91-87289-23-1 (ISBN)
Disputation
2017-05-12, E1405, Tekniska Högskolan, Jönköping, 10:00 (Engelska)
Opponent
Handledare
Forskningsfinansiär
Vetenskapsrådet, 2011-4992
Tillgänglig från: 2017-04-13 Skapad: 2017-04-13 Senast uppdaterad: 2018-08-17Bibliografiskt granskad
Cenanovic, M., Hansbo, P. & Larsson, M. G. (2016). Cut finite element modeling of linear membranes. Computer Methods in Applied Mechanics and Engineering, 310, 98-111
Öppna denna publikation i ny flik eller fönster >>Cut finite element modeling of linear membranes
2016 (Engelska)Ingår i: Computer Methods in Applied Mechanics and Engineering, ISSN 0045-7825, E-ISSN 1879-2138, Vol. 310, s. 98-111Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

We construct a cut finite element method for the membrane elasticity problem on an embedded mesh using tangential differential calculus, i.e., with the equilibrium equations pointwise projected onto the tangent plane of the surface to create a pointwise planar problem in the tangential direction. Both free membranes and membranes coupled to 3D elasticity are considered. The discretization of the membrane comes from a Galerkin method using the restriction of 3D basis functions (linear or trilinear) to the surface representing the membrane. In the case of coupling to 3D elasticity, we view the membrane as giving additional stiffness contributions to the standard stiffness matrix resulting from the discretization of the three-dimensional continuum.

Nyckelord
Cut finite element method, Embedded membrane, Membrane shell, Tangential derivative
Nationell ämneskategori
Teknisk mekanik Datorteknik
Identifikatorer
urn:nbn:se:hj:diva-28420 (URN)10.1016/j.cma.2016.05.018 (DOI)000384859400005 ()2-s2.0-84979299087 (Scopus ID)
Tillgänglig från: 2015-12-01 Skapad: 2015-12-01 Senast uppdaterad: 2018-01-10Bibliografiskt granskad
Cenanovic, M. (2015). Finite element methods on surfaces. (Licentiate dissertation). Jönköping: Jönköping University, School of Engineering
Öppna denna publikation i ny flik eller fönster >>Finite element methods on surfaces
2015 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

The purpose of this thesis is to improve numerical simulations of surface problems. Two novel computational concepts are analyzed and applied on two surface problems; minimal surface problems and elastic membrane problems. The concept of tangential projection implies that direct computation on the surface is made possible compared to the classical approach of mapping 2D parametric surfaces to 3D surfaces by means of differential geometry operators. The second concept presented is the cut finite element method, in which the basic idea of discretization is to embed the d- 1-dimensional surface in a d-dimensional mesh and use the basis functions of a higher dimensional mesh but integrate over the surface. The aim of this thesis is to present the basics of the two main approaches and to provide details on the implementation.

Ort, förlag, år, upplaga, sidor
Jönköping: Jönköping University, School of Engineering, 2015. s. 41
Serie
JTH Dissertation Series ; 12
Nationell ämneskategori
Maskinteknik Datorteknik
Identifikatorer
urn:nbn:se:hj:diva-28424 (URN)978-91-87289-13-2 (ISBN)
Handledare
Forskningsfinansiär
Vetenskapsrådet, 2011-4992
Tillgänglig från: 2015-12-01 Skapad: 2015-12-01 Senast uppdaterad: 2018-01-10Bibliografiskt granskad
Cenanovic, M., Hansbo, P. & Larson, M. G. (2015). Minimal surface computation using a finite element method on an embedded surface. International Journal for Numerical Methods in Engineering, 104(7), 502-512
Öppna denna publikation i ny flik eller fönster >>Minimal surface computation using a finite element method on an embedded surface
2015 (Engelska)Ingår i: International Journal for Numerical Methods in Engineering, ISSN 0029-5981, E-ISSN 1097-0207, Vol. 104, nr 7, s. 502-512Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

We suggest a finite element method for finding minimal surfaces based on computing a discrete Laplace–Beltrami operator operating on the coordinates of the surface. The surface is a discrete representation of the zero level set of a distance function using linear tetrahedral finite elements, and the finite element discretization is carried out on the piecewise planar isosurface using the shape functions from the background three-dimensional mesh used to represent the distance function. A recently suggested stabilized scheme for finite element approximation of the mean curvature vector is a crucial component of the method.

Nyckelord
mean curvature; Laplace–Beltrami operator; level set; ghost penalty stabilization
Nationell ämneskategori
Teknisk mekanik Beräkningsmatematik
Identifikatorer
urn:nbn:se:hj:diva-28151 (URN)10.1002/nme.4892 (DOI)000362552500003 ()2-s2.0-84928151825 (Scopus ID)
Anmärkning

Special Issue: Advances in Embedded Interface Methods

Tillgänglig från: 2015-10-09 Skapad: 2015-10-09 Senast uppdaterad: 2017-12-01Bibliografiskt granskad
Amouzgar, K., Cenanovic, M. & Salomonsson, K. (2015). Multi-objective optimization of material model parameters of an adhesive layer by using SPEA2. In: Qing Li, Grant P Steven, Zhongpu (Leo) Zhang (Ed.), Advances in structural and multidisciplinary optimization: Proceedings of the 11th World Congress of Structural and Multidisciplinary Optimization (WCSMO-11). Paper presented at 11th World Congress of Structural and Multidisciplinary Optimization (WCSMO-11) (pp. 249-254). The International Society for Structural and Multidisciplinary Optimization (ISSMO)
Öppna denna publikation i ny flik eller fönster >>Multi-objective optimization of material model parameters of an adhesive layer by using SPEA2
2015 (Engelska)Ingår i: Advances in structural and multidisciplinary optimization: Proceedings of the 11th World Congress of Structural and Multidisciplinary Optimization (WCSMO-11) / [ed] Qing Li, Grant P Steven, Zhongpu (Leo) Zhang, The International Society for Structural and Multidisciplinary Optimization (ISSMO) , 2015, s. 249-254Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

The usage of multi material structures in industry, especially in the automotive industry are increasing. To overcome the difficulties in joining these structures, adhesives have several benefits over traditional joining methods. Therefore, accurate simulations of the entire process of fracture including the adhesive layer is crucial. In this paper, material parameters of a previously developed meso mechanical finite element (FE) model of a thin adhesive layer are optimized using the Strength Pareto Evolutionary Algorithm (SPEA2). Objective functions are defined as the error between experimental data and simulation data. The experimental data is provided by previously performed experiments where an adhesive layer was loaded in monotonically increasing peel and shear. Two objective functions are dependent on 9 model parameters (decision variables) in total and are evaluated by running two FEsimulations, one is loading the adhesive layer in peel and the other in shear. The original study converted the two objective functions into one function that resulted in one optimal solution. In this study, however, a Pareto frontis obtained by employing the SPEA2 algorithm. Thus, more insight into the material model, objective functions, optimal solutions and decision space is acquired using the Pareto front. We compare the results and show good agreement with the experimental data.

Ort, förlag, år, upplaga, sidor
The International Society for Structural and Multidisciplinary Optimization (ISSMO), 2015
Nyckelord
Multi-objective optimization, parameter identification, micro mechanical model, adhesive, CZM
Nationell ämneskategori
Datorteknik Maskinteknik
Identifikatorer
urn:nbn:se:hj:diva-28422 (URN)978-0-646-94394-7 (ISBN)
Konferens
11th World Congress of Structural and Multidisciplinary Optimization (WCSMO-11)
Tillgänglig från: 2015-12-01 Skapad: 2015-12-01 Senast uppdaterad: 2018-09-12Bibliografiskt granskad
Cenanovic, M., Hansbo, P. & Larsson, M. G.Finite element procedures for computing normals and mean curvature on triangulated surfaces and their use for mesh refinement.
Öppna denna publikation i ny flik eller fönster >>Finite element procedures for computing normals and mean curvature on triangulated surfaces and their use for mesh refinement
(Engelska)Manuskript (preprint) (Övrigt vetenskapligt)
Abstract [en]

In this paper we consider finite element approaches to computing the mean curvature vector and normal at the vertices of piecewise linear triangulated surfaces. In particular, we adopt a stabilization technique which allows for first order L2-convergence of the mean curvature vector and apply this stabilization technique also to the computation of continuous, recovered, normals using L2-projections of the piecewise constant face normals. Finally, we use our projected normals to define an adaptive mesh refinement approach to geometry resolution where we also employ spline techniques to reconstruct the surface before refinement. We compare or results to previously proposed approaches.

Nationell ämneskategori
Maskinteknik Datorteknik
Identifikatorer
urn:nbn:se:hj:diva-35367 (URN)
Tillgänglig från: 2017-04-13 Skapad: 2017-04-13 Senast uppdaterad: 2018-01-13Bibliografiskt granskad
Cenanovic, M.Numerical error estimation for a TraceFEM membrane and distance function on P1 and P2 tetrahedra.
Öppna denna publikation i ny flik eller fönster >>Numerical error estimation for a TraceFEM membrane and distance function on P1 and P2 tetrahedra
(Engelska)Manuskript (preprint) (Övrigt vetenskapligt)
Nationell ämneskategori
Maskinteknik Datorteknik
Identifikatorer
urn:nbn:se:hj:diva-35368 (URN)
Tillgänglig från: 2017-04-13 Skapad: 2017-04-13 Senast uppdaterad: 2018-01-13Bibliografiskt granskad
Organisationer

Sök vidare i DiVA

Visa alla publikationer