Endre søk
Link to record
Permanent link

Direct link
BETA
Alternativa namn
Publikasjoner (8 av 8) Visa alla publikasjoner
Bruch, J., Rösiö, C., Bellgran, M. & Granlund, A. (2014). User-supplier integration throughout the different lifecycle stages of the production equipment. In: 6th Swedish Production Symposium SPS'14: . Paper presented at 6th Swedish Production Symposium SPS'14, Göteborg, 16-18 September, 2014..
Åpne denne publikasjonen i ny fane eller vindu >>User-supplier integration throughout the different lifecycle stages of the production equipment
2014 (engelsk)Inngår i: 6th Swedish Production Symposium SPS'14, 2014Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

As production equipment is often designed and built by equipment suppliers rather than made in-house, a collaborative buyer-supplier-relationship could be utilized in order to create robust solutions and enhance innovative ideas. The purpose with this paper is to explore critical user-supplier collaboration activities throughout the different lifecycle stages of the production equipment development. The purpose is accomplished by a literature review and a case study including more than 30 semi-structured interviews at four companies. The challenges vary depending on equipment life cycle phase and user/supplier perspective. A life cycle model with eight stages is proposed including critical interconnected activities for each stage.

Emneord
Production equipment development, User-Equipment supplier integration, Life cycle, Manufacturing industry.
HSV kategori
Identifikatorer
urn:nbn:se:hj:diva-29734 (URN)
Konferanse
6th Swedish Production Symposium SPS'14, Göteborg, 16-18 September, 2014.
Prosjekter
XPRESEQUIP: User-Supplier integration in production equipment design
Tilgjengelig fra: 2014-12-03 Laget: 2016-04-08 Sist oppdatert: 2016-04-08bibliografisk kontrollert
Bellgran, M., Bruch, J., Rösiö, C. & Wiktorsson, M. (2013). Decision support for production localization: Process, activities and localization factors. In: : . Paper presented at 20th EurOMA International Annual Conference, Operations Management at the Heart of Recovery, Dublin, 7th-12th June, 2013.. International Annual EurOMA Conference
Åpne denne publikasjonen i ny fane eller vindu >>Decision support for production localization: Process, activities and localization factors
2013 (engelsk)Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

Traditional production location decisions are mainly based upon economic factors while factors that facilitate decision makers in selecting the most suitable production location in terms of operations performance are rarely considered. Therefore, this paper presents a developed decision support for production localization that emphasises operational factors to be considered in the decision making. The research methodology combines a literature study with a multiple case study method. The findings are synthesised into a five phase decision process for making production localization decisions in practice. For each of these phases, key activities with related tools and expected output are developed.

sted, utgiver, år, opplag, sider
International Annual EurOMA Conference, 2013
Emneord
Production location decision, Decision process, Localization factors
HSV kategori
Identifikatorer
urn:nbn:se:hj:diva-29732 (URN)
Konferanse
20th EurOMA International Annual Conference, Operations Management at the Heart of Recovery, Dublin, 7th-12th June, 2013.
Prosjekter
PROLOCXPRES
Forskningsfinansiär
XPRES - Initiative for excellence in production research
Tilgjengelig fra: 2016-04-08 Laget: 2016-04-08 Sist oppdatert: 2018-09-12bibliografisk kontrollert
Bjelkemyr, M., Wiktorsson, M., Rösiö, C., Bruch, J. & Bellgran, M. (2013). Production Localization Factors: An Industrial and Literature Based Review. In: E. Shehab, P. Ball & B. Tjahjono (Ed.), Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013): . Paper presented at 11th International Conference on Manufacturing Research, Cranfield, 19-20 September, 2013. (pp. 489-494). International Conference on Manufacturing Research (ICMR)
Åpne denne publikasjonen i ny fane eller vindu >>Production Localization Factors: An Industrial and Literature Based Review
Vise andre…
2013 (engelsk)Inngår i: Proceedings of the 11th International Conference on Manufacturing Research (ICMR2013) / [ed] E. Shehab, P. Ball & B. Tjahjono, International Conference on Manufacturing Research (ICMR) , 2013, s. 489-494Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

Decision are commonly based on the available or easily accessible information; this is also true for more complex assessments like production localization. Where to locate production is often a key strategic decisions that has great impact on a company’s profitability for a long time; insufficient business intelligence may therefore have grave consequences. Six production localization factor studies have been assessed to see if they are focusing on the same issues and if there are any gaps. A new approach for structuring localization factors and the localization process is then presented and assessed with regards to some previously identified critical issues.

sted, utgiver, år, opplag, sider
International Conference on Manufacturing Research (ICMR), 2013
Emneord
production system, production localization, industrial study, localization factors.
HSV kategori
Identifikatorer
urn:nbn:se:hj:diva-29733 (URN)978-1-907413-23-0 (ISBN)
Konferanse
11th International Conference on Manufacturing Research, Cranfield, 19-20 September, 2013.
Prosjekter
PROLOC - Manufacturing Footprint during the Product´s Life CycleXPRES
Tilgjengelig fra: 2013-12-16 Laget: 2016-04-08 Sist oppdatert: 2018-09-12bibliografisk kontrollert
Rösiö, C., Wiktorsson, M., Bruch, J. & Bellgran, M. (2013). Risk Analysis in Manufacturing Footprint Decisions. In: E. Shehab, P. Ball, & B. Tjahjono (Ed.), Advances in manufacturing technology XXVII : proceedings of the 11th International Conference on Manufacturing Research : incorporating the 28th National Conference on Manufacturing Research: . Paper presented at International Conference on Manufacturing Research 2013, Cranfield UK, 19-20 September, 2013 (pp. 495-500). Cranfield University Press
Åpne denne publikasjonen i ny fane eller vindu >>Risk Analysis in Manufacturing Footprint Decisions
2013 (engelsk)Inngår i: Advances in manufacturing technology XXVII : proceedings of the 11th International Conference on Manufacturing Research : incorporating the 28th National Conference on Manufacturing Research / [ed] E. Shehab, P. Ball, & B. Tjahjono, Cranfield University Press , 2013, s. 495-500Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

A key aspect in the manufacturing footprint analysis is the risk and sensitivity analysis of critical parameters. In order to contribute to efficient industrial methods and tools for making well-founded strategic decisions regarding manufacturing footprint this paper aims to describe the main risks that need to be considered while locating manufacturing activities, and what risk mitigation techniques and strategies that are proper in order to deal with these risks. It is also proposed how the risk analysis should be included in the manufacturing location decision process.

sted, utgiver, år, opplag, sider
Cranfield University Press, 2013
Emneord
risk analysis, manufacturing location decision process, manufacturing footprint
HSV kategori
Identifikatorer
urn:nbn:se:hj:diva-29745 (URN)978-1-907413-23-0 (ISBN)
Konferanse
International Conference on Manufacturing Research 2013, Cranfield UK, 19-20 September, 2013
Prosjekter
PROLOC - Manufacturing Footprint during the Product´s Life Cyclexpres
Forskningsfinansiär
XPRES - Initiative for excellence in production research
Tilgjengelig fra: 2013-11-01 Laget: 2016-04-08 Sist oppdatert: 2018-09-12bibliografisk kontrollert
Schedin, J., Rösiö, C. & Bellgran, M. (2012). Considering Production Localisation in the Production System Design process. In: : . Paper presented at The Fifth International Production Symposium,(SPS12), Linköping, 6-8 November, 2012..
Åpne denne publikasjonen i ny fane eller vindu >>Considering Production Localisation in the Production System Design process
2012 (engelsk)Konferansepaper, Publicerat paper (Fagfellevurdert)
HSV kategori
Forskningsprogram
innovation och design
Identifikatorer
urn:nbn:se:hj:diva-29746 (URN)
Konferanse
The Fifth International Production Symposium,(SPS12), Linköping, 6-8 November, 2012.
Forskningsfinansiär
XPRES - Initiative for excellence in production research
Tilgjengelig fra: 2012-12-20 Laget: 2016-04-08 Sist oppdatert: 2018-09-12bibliografisk kontrollert
Jackson, M., Bellgran, M. & Wiktorsson, M. (2008). Factory-in-a-box - Demonstrating the next generation manufacturing provider. In: Mamoru Mitsuishi, Kanji Ueda and Fumihiko Kimura (Ed.), Manufacturing systems and technologies for the new frontier: . Paper presented at The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan (pp. 341-346). Springer London
Åpne denne publikasjonen i ny fane eller vindu >>Factory-in-a-box - Demonstrating the next generation manufacturing provider
2008 (engelsk)Inngår i: Manufacturing systems and technologies for the new frontier / [ed] Mamoru Mitsuishi, Kanji Ueda and Fumihiko Kimura, Springer London , 2008, s. 341-346Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

Meeting customer demands require manufacturing systems with a high degree of flexibility, low-cost/low-volume manufacturing skills, as well as short delivery times. On top of these challenges, there is a gigantic need within industry for technologies and strategies that will reduce CO(2) emissions globally. In this challenging environment there is a need to identify and develop new and improved manufacturing capabilities within the manufacturing industry. The Factory-in-a-Box concept consists of standardized production modules that are e.g. installed in a container and transported by truck or by train. The concept has been developed, exemplified and realized in five industrial demonstrators developed by researchers together with competitive manufacturing companies in Sweden such as ABB Robotics, Bombardier and Pharmadule. The objective of this paper is to discuss the possibility of realizing a Product Service System (PSS) using the results from the Factory-in-a-Box project.

sted, utgiver, år, opplag, sider
Springer London, 2008
HSV kategori
Forskningsprogram
innovation och design
Identifikatorer
urn:nbn:se:hj:diva-34516 (URN)10.1007/978-1-84800-267-8_70 (DOI)000256581900070 ()978-1-84800-267-8 (ISBN)
Konferanse
The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan
Tilgjengelig fra: 2010-03-03 Laget: 2016-12-22 Sist oppdatert: 2016-12-28bibliografisk kontrollert
Bellgran, M., Yamamoto, Y. & Jackson, M. (2008). Kaizen and Kaikaku–: Recent challenges and support models. In: : . Paper presented at Swedish Production Symposium SPS, Stockholm, 2008. Stockholm
Åpne denne publikasjonen i ny fane eller vindu >>Kaizen and Kaikaku–: Recent challenges and support models
2008 (engelsk)Konferansepaper, Publicerat paper (Fagfellevurdert)
sted, utgiver, år, opplag, sider
Stockholm: , 2008
HSV kategori
Identifikatorer
urn:nbn:se:hj:diva-34473 (URN)
Konferanse
Swedish Production Symposium SPS, Stockholm, 2008
Prosjekter
XPRES
Tilgjengelig fra: 2013-12-10 Laget: 2016-12-22 Sist oppdatert: 2016-12-28bibliografisk kontrollert
Wiktorsson, M., Bellgran, M. & Jackson, M. (2008). Sustainable Manufacturing - Challenges and Possibilities for Research and Industry from a Swedish perspective. In: : . Paper presented at The 41st CIRP Conference on Manufacturing Systems.
Åpne denne publikasjonen i ny fane eller vindu >>Sustainable Manufacturing - Challenges and Possibilities for Research and Industry from a Swedish perspective
2008 (engelsk)Konferansepaper, Publicerat paper (Fagfellevurdert)
HSV kategori
Forskningsprogram
innovation och design
Identifikatorer
urn:nbn:se:hj:diva-34555 (URN)
Konferanse
The 41st CIRP Conference on Manufacturing Systems
Tilgjengelig fra: 2010-03-03 Laget: 2016-12-22 Sist oppdatert: 2016-12-22bibliografisk kontrollert
Organisasjoner
Identifikatorer
ORCID-id: ORCID iD iconorcid.org/0000-0002-0662-539X